MU22 Miller Edge Gate and Door Safety Edge
Miller Edge Vertical Lift Sensing Edge model MU-22
The MU22 pressure sensitive electric edge is custom manufactured to your exact specifications for length, width, height and sensitivity. When struck lightly or at an angle, the MU22 will send an immediate electrical signal to your overhead gate or door lifting operator to start, stop and/or reverse operations. It is completely flexible and will contour curved surfaces. The MU style SensingEdge is extremely versatile – its’ profile can be square, rectangular or even angled. Contact us with your specifications or choose from the options below and we will design the best SensingEdge for your application.
Color: gray, yellow, black or white
How to Build a MU22:
1- Pick a basic style
2- Pick a color
3- Pick a configuration
4- Pick an outlet location
5- Specify a length
|PICK A COVER COLOR||PICK A CONFIGURATION (max.10ft)|
| 2 wire $14.35/ft
2 wire universal $14.05/ft
4 wire $15.15/ft
4 wire universal $15.00/ft
XR-5 Cover additional $5.00/ft
|PICK AN OUTLET LOCATION||OPTIONS|
For Y/B striped cover, add $0.50/ft.
For XR-5 cover, add $5.00/ft.
Please contact us for current lead times. Prefabricated or stock items normally ship within 3 to 5 working days. Manufactured items normally ship within 5 to 7 working days.
Stock sizes are available for most edge products (4ft., 5ft., & 6ft.)
Shipping & Handling:
Shipping prices vary on order size and destination to be shipped, in
which case, you will be notified before the order is charged.
Returns & Exchanges:
There is a 25% Restocking Fee for ALL Miller Edge Safety Products, including stocked and manufactured safety edges, mats, and accessories. The fee applies to all Miller Edge products returned or exchanged for any reason, other than manufacturer defects. Warranty is void where evidence of misuse or abuse is present.
For stock items and shipping quotes, please feel free to contact us
Remove edge from shipping container and lay out flat and straight. Close air valve. Position edge in desired location and attach with screws through mounting flange at both ends and center. Continue to attach edge by securing mounting flaps with screws spaced 24" apart. Do not place screws below the seal line. Mounting flaps may be covered with trim molding depending on desired appearance.