26
February
0
Comments
Model BX-LP Series Low Power/ Low Current Consumption Single Channel Loop Detectors
in Categories
 |
|
| Model BX-LP Series
Low Power / Low Current Consumption |
Features & Benefits
 Extremely “Low Current Consumption”. When LEDs are deactivated and utilizing factory set positions, the Model BX-LP (relay version) draws 30.0 milliamps max. and the Model BX-LP-SS (solid-state version) draws 4.0 milliamps max. See the “Power” specification below. Excellent detector for all solar and battery-sourced installations. All switches are accessible from the front panel. Loop Diagnostics: Front panel “Fail” LED indicates Open/Shorted Loop condition. A second distinct flash rate indicates a loop failure has occurred and was corrected. Sensitivity Boost, for gate operation where high profile vehicles might be encountered. 2-Second CALL Delay. Dual Programmable relays offer selectable modes of operation: |
|
| Output A: True Presence™ (Infinite) or Limited Presence. Output B: Presence or Pulse on Entry or Pulse on Exit. |
|
| Selectable FAIL-SAFE or FAIL-SECURE operation when a loop fault occurs. 4 loop frequencies selectable from the front panel. 8 levels of sensitivity selectable from front panel rotary switch. Super bright LEDs provide separate DETECT, and loop FAIL indications. The “DET” LED automatically turns off after 3 minutes of power on or after a reset to conserve power. 11 pin rear “Amphenol” connector. Configurations available: 12 VDC (24 VDC available by special order). |
|