Search

Sears Craftsman Liftmaster Garage
Door Opener Security+ Remote
Transmitter model 972LM


Availability Usually ships the same business day.

Sears Craftsman LiftMaster Chamberlain Garage Door Opener Security+ Remote Transmitter model 972LM
Sku: 972LM

Quantity151225
Price$27.23$25.60$24.58$23.36

Quantity:
Email a Friend




LiftMaster 972LM Security+ Garage Door Opener Remote Transmitter

Compatible with the following models:
  • Liftmaster 91LM, 92LM, 96LM, 970LM, 971LM, 973LM and 974LM
  • Chamberlain 950CB, 953CB, 956CB
  • Sears Craftsman 139.53681, 139.53680
  • Compatible with Security+ systems with Amber learn button, including Chamberlain, Sears Craftsman and Raynor code rolling residential openers (Safety Signal)
  • Models manufactured on or after July 2001 are capable of programming a 61LM 9-dip switch remote or an 81LM Billion Code (Green Learn Button) remote to the 2nd button of the 972LM. Models manufactured on or before June 2001 can only program a 61LM 9-dip switch remote to the 2nd button of the 972LM. Programming is done from remote to remote. For instructions, click here.
  • Also compatible with wireless keypad model number 976LM (same as model 940CB, 139.53684)
  • Compatible with Liftmaster garage door opener model numbers 1240R, 1245R, 1246R, 1255R, 1256R, 1265, 1280R, 1000SDR, 2000SDR, 1245 GMR, 1255GMR, 985, 2265, 2565, 1280R, 2280, 2580, 2220, 2110, ATS211R, 2500
  • Compatible with Chamberlain garage door opener model numbers 1200, 2200, 4200, 6200, 7220, CG40, CG40, PD210, PD610, PD612K, 7320, 8200, 9200, 4620, 4640, 9902, PD420, PD460-2, 9950
  • Compatible with Security+ garage opener receiver model numbers 335LM, 535LM, 412HM, 635LM
  • 390 MHZ Frequency, 100 Billion codes with code rotating technology, 2 channel transmitter, compatible with models manufactured from 1997-2005, Visor clip and Lithium battery (5 years life w/normal use) included
LiftMaster 972LM Programming Instructions



[ back to top ] [ home ]

972LM Legacy Programming - How to program a 6 Series 9-Dip Switch remote or an 8 Series Billion Code Green Learn Button remote to a 972LM

Models manufactured on or after July 2001 are capable of programming a 6 Series 9-Dip Switch remote or an 8 Series Billion Code (Green Learn Button) remote to the 2nd button of the 972LM. Models manufactured on or before June 2001 can only program a 6 Series 9-Dip Switch remote to the 2nd button of the 972LM.

Programming the 972LM 2-Channel Security+ Remote to a 61LM 9-dip switch remote or an 81LM Billion Code remote:
  1. Press and hold both buttons on the 972LM transmitter until the yellow indicator light on the back cover of the remote flashes repeatedly. It will flash for 30 seconds.
  2. While still pressing and holding the buttons on the 972LM, press and hold the button you wish to program to the 972LM until the yellow indicator light on the back of the 972LM goes out.
  3. The remote should now be programmed and is ready to work!

Resetting the Right push button back to Security+ as follows:
Push and hold both buttons on the 972LM for ten seconds or until the yellow indicator light on the back stops blinking. The remote has been defaulted to one of six randomly preprogrammed Security+ settings.

Quick Remote Search
Manufacturers
Guaranteed safe online shopping at www.aaaremotes.com Garage door opener parts low price guarantee
By Category

Knowledge Base  

Information  

Store Hours  Click here to open
Tech Talk Ask the Pros

Verified by Visa

PriceGrabber User Ratings for AAARemotes ecommerce provided by Yahoo! Small Business Official PayPal Seal ePublicEye Rating for AAA Remotes
Copyright © by Mega Access Controls, Inc. All Rights Reserved.
No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of Mega Access Controls, Inc.