Linear Door/Window Battery Powered
Stationary Universal External Contact
or Glass Break Transmitter DXS-31  
Linear Door/Window Battery Powered Stationary Universal External Contact or Glass Break Transmitter DXS-31The Model DXS-31 Supervised Door/Window Transmitter is a battery powered stationary transmitter designed for use with Linear's DXS and DX
format receivers. This transmitter can be used in a variety of wireless remote control applications. Triggering the transmitter with its
built-in magnetic switch, an external switch or an external glass break detector sends a digitally coded wireless signal to its companion
receiver.
The digital DXS code format features over a million possible codes. The DXS transmitters are precoded at the factory to
unique codes, so no field coding is required. The DXS-31 can send four different codes: alarm, restore, low battery and status.
In a
typical installation, the magnet is mounted on a door or window and the transmitter is mounted on the frame. When the magnet moves more than
1/2" away from the transmitter, an alarm signal is sent. When the magnet returns next to the unit, a restore signal is sent. Alarms and
restores can also be sent from external contacts wired to the terminal block. Pressing the case sends a test transmission that updates the
receiver to the current state of the contacts and lights the test indicator.
|
General Specifications
- Dimensions: 1.5 in W x 3.3 in H x 0.88 in D (38 x 84 x 22 mm)
- Power: Two 3V DL-2032 lithium batteries (supplied); optional - two 3V DL-2450 lithium batteries for extended life
- Battery Life: Three years (typical) with DL-2032 batteries; five years with DL-2450 batteries
- Measured Range: 1,500 feet, open air, with DVS-2400 control panel
- Code Outputs: Alarm, alarm restore, supervisory and low battery
- External Input Terminals:
Terminals 1, 2 accept N/C contact devices
Terminals 2, 3 accept N/O glass break sensors
- JUMPER PIN MODE SELECTION
Pins 1, 2 Glass break operation only
Pins 2, 3 For external contact and glass break operation
Pins 3, 4 For internal reed switch and glass break operation
Jumper removed: Internal, external and glass break operation
Operating Frequency: 315 MHz
- Operating Temperature: 32° to 120° F (0° to 49° C)
|
Features
- Alarm, alarm restore, supervisory and low battery transmissions
- Includes magnet for internal contact
- Includes mounting shoe
- External Contact Terminals
- DXS format
- N/O or N/C input loop circuit
- Powered by 2032 two lithium batteries (included)
- Optional 2450 lithium batteries can be used for extended life
|
|
 | Compatible Receivers |  |
 | Accessories |  |
Special Orders: All Special Order items require a 50% deposit of the total before ordering. Please call for lead times on Special Order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock transmitters/receivers, any stock or non-stock item we consider to be a special order item, and/or any item being ordered specifically for you are considered a special order. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 50% special order restocking fee. Warranty is void where evidence of misuse or abuse is present. |
 |
Manufacturers |
 |
|
By Category |
|
|
Close