Genie Screw Drive Garage Door Opener Replacement Coupler 30257T
Genie Screw Drive Garage Door Opener Replacement Coupler 30257T
Genie Screw Drive Garage Door Opener Replacement Coupler 30257T
Attaches rail assembly to motor head. Mounts to rear of opener and fits in motor head
For Clutchless Screw Drive Openers
Genuine Genie Replacement Part
Typical symptoms of a stripped Screw Coupler is a grinding noise coming from the rear of the motor head. The motor turns but the screw does not. Remove Coupler and check if it is stripped or has no more threading
On Genie’s "clutchless" openers, there is a small plastic coupler that connects the screw assembly to the main power head. To inspect and replace that part, remove the two screws holding the rail to the main power head. Slide the rail away from the main power head. The coupler may still be attached to the motor shaft. Remove the coupler with a pair of needle nose pliers and inspect both sides of the coupler. Note: If the screw assembly on your Genie garage door opener protrudes out the back end of the main power head, you do not have a "clutchless" opener, and there is no coupler on that opener.
Genie Screw Drive Garage Door Opener Replacement Coupler 30257T
Close
