XR-4 Mid Range receiver

Up to 10 Miles of Line-of-Sight Range (XT-1, XT-4)

Up to Two Miles of Line-of-Sight with Handheld Devices

Superheterodyne Receiver Technology

Over 64,000 Codes

Form "C" Alarm Output (XR-1 and XR-4)

Open Collector Alarm Outputs (XR-16)

Weather-Resistant Case (XR-1, XR-4, XR-D)

Power On and RF Activity Indicators

Complete RF Supervision of XT-1 and XT-4 Transmitters (Field Enabled)

Ordering

Model

Product Number

Description

XR-1

SSR00068

1-Channel Receiver

XR-4

SSR00069

4-Channel Receiver

XR-16

SSR00066

16-Channel Receiver

XR-D

SSR00067

Data Output Only Receiver

Accessories

ANT-1

SNE00001

8-inch Whip Antenna

ANT-2

SNE00002

Quarter Wave (3 foot) Antenna with 18 Feet of Coaxial Cable

CON-90

SNE00005

Right Angle Adaptor, ANT-1 to XT

CON-180

SNE00006

Straight Adaptor, ANT-1 to XT

T-124.8DC

AAE00382

Power Supply, Wall Mount, Recommended for XR devices

M-102

CAE00052

Power Supply, 1 amp 12 VDC

B-1260

100099

12 VDC, 6 AH Battery

General Specifications

Operating Voltage:

12 to 15.o VDC

Operating Current:

(See specific transmitter type)

Operating Temperature:

-4° to +140° F (-20° to +60° C)

Receiver Type:

Superheterodyne

Sensitivity:

-118 dB (minimum)

Selectivity:

6 KHz

Carrier Frequency:

27,255 MHz

Number of Codes:

65,536

Code Setting Method:

DIP switch programming

Data Input:

Alarm, restore, status, and low battery

Status Exception Time Frame:

Four hours

Antenna Impedance:

50 Ohms (not supplied: see ANT-1, ANT-2)

ADDITIONAL XR-1 AND XR-4 SPECIFICATIONS:

Dimensions:

4.25 in L x 2.5 in W x 6.25 in H (108 x 64 x 159 mm)

Weight:

1 lb. (0.454 Kg)

Current Drain:

XR-1 -25 mA, typical standby 65 mA alarm @ 12 VDC
XR-4 - 24 mA, typical standby 185 mA alarm @ 12 VDC

Outputs:

Alarm - form "C" relay per channel (XR-1, XR-4)
Status exception - one open collector output per receiver
Low Battery - one open collector output per receiver
Audio and signal strength test points

ADDITIONAL XR-D SPECIFICATIONS:

Dimensions:

4.25 in L x 2.5 in W x 6.25 in H (108 x 64 x 159 mm)

Weight:

1.6 lb. (0.454 Kg)

Current Drain:

40 mA (typical)

Outputs:

ASCII, RS232 serial output, audio and signal strength test points

ADDITIONAL XR-16 SPECIFICATIONS:

Dimensions:

7.9 in L x 1.25 in W x 6.5 in H (201 x 32 x 165 mm)

Weight:

1.5 lb. (0.680 Kg)

Current Drain:

300 mA (max) @ 12 VDC

Outputs:

16 open collector alarm outputs field programmable for either N/O or N/C operation; one form "C" common output relay; one open collector status exception output; open collector low battery output; audio and signal strength test points

Indicators:

Three 7-segment displays; provides alarm, status, and battery indication by channel