 |
By Category |
 |
 |
Manufacturers |
 |
|
800-349-8313
- PST Mon - Fri
23961 Craftsman Road
Suite C
Calabasas, CA 91302
Fax
Your Order 24 Hours
818 222-7736
we accept
Close
|
| REMOTE PROXIMITY RECEIVER Model Number: AM-RPR  Linear Remote Proximity Receiver model AM-RPRThis remote proximity receiver allows short read ranges (3-5 inches). Mounts in a single gang box. The Remote Proximity Receiver (Model AM-RPR) is for adding localized keyless entry to a Linear radio-based access controller. Users can gain access to a controlled entrance by triggering a transmitter within two-to-three inches of the receiver’s faceplate. Its ultra-short range allows the AM-RPR to be placed near the controlled opening, so that transmitters will not be detected by the wrong receiver. A two-color LED on the faceplate acts as a status display. The indicator lights red when the receiver is getting dc power from the Linear access controller and turns green when access is granted to a transmitter. Installation of the AM-RPR is easy. It mounts in a single-gang electrical box and connects to the system controller through a six-wire cable.
Features
- Convenient, cost-effective, and reliable form of door or entrance control.
- 2-to-3-inch radio transmitter read range.
- Compatible with Linear radio-based access control systems.
- 2-color status LED indicates "power on" and "access granted".
- Installs in a single-gang electrical box.
- Prevents transmitter from being detected by wrong receiver.
- Same as product number ACP00560.
General Specifications
Linear AM-RPR Remote Proximity Receiver Operations Manual
Models compatible with the AM-RPR
|
Special Orders: All Special Order items require a 50% deposit of the total before ordering. Please call for lead times on Special Order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock transmitters/receivers, any stock or non-stock item we consider to be a special order item, and/or any item being ordered specifically for you are considered a special order. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 50% special order restocking fee. Warranty is void where evidence of misuse or abuse is present.
|
General
Specifications
|
| Power: |
Supplied
by controller, six-wire connection |
| Indication: |
Red
LED for DC power from a controller; LED turns green when access is granted
to a transmitter |
| Test
Mode: |
For
checking radio reception |
| RFI
Protection: |
Small
ferrite "doughnut" supplied to reduce radio reception in the wires |
| Recommended
Wire Type: |
Up
to 300 feet, BELDEN 9931 or equivalent (24 AWG); up to 500 feet, WEICO 9405
or equivalent (20 AWG) |
Compatible models:
| MDT-1A |
1-Channel Handheld Transmitter |
| MDT-1AB |
1-Channel Handheld Single Learn or Block Coded Transmitter |
| MDT-2A |
3-Channel Handheld Transmitter |
| MDT-2AB |
3-Channel Handheld Single Learn or Block Coded Transmitter |
| MDT-4A |
5-Channel Handheld Transmitter |
| MDT-4AB |
5-Channel Handheld Single Learn or Block Coded Transmitter |
| MT-1B |
1 Channel Block Coded Visor Transmitter |
| MT-2B |
2 Channel Block Coded Visor Transmitter |
| ACT-31B |
1 Channel Block Coded Key Ring Transmitter |
| ACT-34B |
4 Channel Block Coded Key Ring Transmitter |
| MDKP |
Wireless Keypad |
| ACT-21A |
1 Channel Mini Transmitter |
| ACT-21B |
1 Channel Mini Single Learn or Block Coded Key Ring Transmitter |
| ACT-22A |
3-Channel Key Chain |
| ACT-22B |
3-Channel Mini Single Learn or Block Coded Key Ring Transmitter |
| MGT |
Supervised Gate Edge Transmitter |
| AM/II |
Multidoor Access Controller |
| AE-1 |
Liquid Crystal Display Telephone Entry |
| AE-2 |
Vacuum Fluorescent Display Telephone Entry |
| 
WE SUPPORT









Video ClipsHow-to-ProgramRemotes and Openers

|