 |
By Category |
 |
|
Manufacturers |
|
|
800-349-8313
- PST Mon - Fri
23961 Craftsman Road
Suite C
Calabasas, CA 91302
Fax
Your Order 24 Hours
818 222-7736
we accept
 Close
|
| MG020 Sliding Safety Edge   
MG020 Miller Edge Gate and Door Safety EdgeMiller Edge Sliding Gate Safety Edge
When touch activated, these slide gate pressure sensitive edges immediately
send an electrical impulse to your gate operator to start, stop and/or reverse
operations. Designed for use in a wide variety of applications, namely sliding
gates, these sensing edges are extremely durable and can be used indoor or out.
Specifications
Color: Black
Length: per specification to nearest ¼"
Sensitivity: 4 psi - standard
Activation: Orange arrows indicate direction of sensitivity
Lead Wire: 2 ft. SJTO 18 gauge - standard
Wire Outlet Location: specify right-hand, left-hand or
end
Electrical Diagram: 2 wire N.O. configuration
Electrical Requirements: 24 volt AC/DC ½ amp
Contact Element: Alumaglas®
Channel: Black extruded PVC or Aluminum
Sensing Edge: Extruded flexible PVC
Temperature Range: -30ºF to +155ºF |
Options
- Color: OSHA Yellow or Standard Black
- 4 wire self monitoring (strongly recommended)
- Soft ends
- Coil Cord attached
- 4 wire fail-safe Control Panel (FS-25-4)
(FS-27A)
- 4 wire intrinsically-safe Control Panel
(FSIS-25-4)
- Extra-sensitive (ME-120XS)
- Pneumatic (MEP-120)
- Mounting Channel Design (see below)
|
Click here
to view installation instructions
Click here for literature
Click here for
FAQ document
How to Build a MG020:
1- Pick a basic style
2- Pick a color
3- Pick
a configuration
4- Pick an outlet location
5- Specify a length
| PICK A COVER COLOR |
PICK A CONFIGURATION (max.10ft) |
|
Black
Yellow
|
2 wire $18.50/ft
2 wire end $18.10/ft
4 wire $19.20/ft
4 wire end $18.90/ft |
| PICK AN OUTLET LOCATION |
MOUNTING CHANNELS (max.10ft) |
|
Left
Right
End
|
ME120-C (Aluminum) $1.64/ft
ME120-PC (Rigid PVC) $0.76/ft
ME120-CH (Aluminum w/ pre-drilled holes) $7.10/ft
ME120-PCH (PVC w/ pre-drilled holes) $5.24/ft
|
Lead Time:
Please contact us for current lead times. Prefabricated or stock items normally ship within 3 to 5 working days. Manufactured items normally ship within 5 to 7 working days.
For Gates:
Stock sizes are available for most edge products (4ft., 5ft., & 6ft.)
Shipping & Handling:
Shipping prices vary on order size and destination to be shipped, in
which case, you will be notified before the order is charged.
Returns & Exchanges:
There is a 25% Restocking Fee for ALL Miller Edge Safety Products, including stocked and manufactured safety edges, mats, and accessories. The fee applies to all Miller Edge products returned or exchanged for any reason, other than manufacturer defects. Warranty is void where evidence of misuse or abuse is present.
For stock items and shipping quotes, please feel free to give us a call at 800-849-3998 or email us at info@aaaremotes.com.
|
Special Orders: All Special Order items require a 50% deposit of the total before ordering. Please call for lead times on Special Order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock transmitters/receivers, any stock or non-stock item we consider to be a special order item, and/or any item being ordered specifically for you are considered a special order. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 50% special order restocking fee. Warranty is void where evidence of misuse or abuse is present.
|
WE SUPPORT
Video ClipsHow-to-ProgramRemotes and Openers
 
 
|
view cart