Model RE-1 - Telephone Intercom System by Linear ™

Control Functions Beyond The Gate
The RE-1 has two built in general purpose relays for maximum system functionality. One can be used for the control relay and the other for a myriad of auxiliary control functions, including activation of safety edge reverse, external lighting, or alarm shunting.

Megacode Inside. Telephone Entry With Wireless!
The RE-1 is the only telephone entry system presently available offering a built in wireless receiver and antenna. But this is not just any wireless receiver. It's the MegaCode radio by Linear, the people who pioneered radio frequency based security and access control. The famous MegaCode unit allows the use of handheld, visor clip, and keychain transmitters (the industry's largest selection) to achieve additional remote control over gates and garage door openers. Its code selection from over one million factory-set possibilities that cannot be changed in the field assures the highest protection against code theft and duplication.

Full-Featured Telephone With Intercom Modes.
The telephone furnished with this entry system has tremendous flexibility. It is functionally identical to any residential phone and offers the following features: it can call up to three pre-programmed off-site numbers; it can generate call waiting tones; and it can call forward via time zone or resident command. For on-premises communications, the RE-1 has a number of valuable intercom capabilities. For a property with multiple entrances, guest houses, or separate apartments, any of these locations can be called, because up to seven RE-1's can share the same telephone line and provide intercom functions (call factory for availablity). In addition, a separate INTERCOM mode allows connection of the RE-1 to a PBX telephone system or a separate residential intercom system via just a pair of wires.

Sophisticated Yet Simple Programming.
Ease of installation is very much a part of the RE-1 concept. Providers can use a standard web browser to program the unit, thus eliminating the need for special software. Programming can also be accomplished from the RE-1's keypad or via a touch-tone telephone. User programming is equally easy. For example, time zone programming is provided to determine the time and/or day residents are active. Programs are also provided to lock out prank calls in the middle of the night, and to lock or open doors and gates as needed.

Optional CCTV. The Ultimate Caller ID.
The RE-1 can be field upgraded with a closed circuit

More Options For A Full-Featured System.
The unique cast housing of the RE-1 has provisions for the integration of a Knox lock for applications requiring a means for emergency access onto the property. This feature eliminates the need for an unsightly separate lock box, thus preserving the RE-1's outstanding aeshtetics. For residences with a second drive entrance, a service entrance, or additional vehicle gates or walk gates, auxiliary keypads are available to provide entrance control. These keypads, part of Linear's access control product line, are also valuable when there is a need to have a keypad code to exit the property. Finally, driveway sensing can be provided for with a loop detector to trigger the RE-1 to announce a vehicle at the gate or to activate a relay to provide more light at the gate.

More Than Single-Dwelling Capacity.
The RE-1 is not limited to residential applications. With its capacity for 100 entry codes and its ability to support up to 100 transmitters it is ideal for sites such as employee parking lots and commercial parking garages. Premises entry can be via keypad as well as transmitter. System activity may be monitored and logged (450 event capacity) for retrieval via computer.

RE-1 Linear Residential Telephone Entry System Overview:

• Two way speakerphone
• Call waiting
• Call forwarding
• Distinctive rings for access calls
• Seven access time zones
• Timed "do not disturb" privacy feature
• Digitally synthesized human voice prompts
• Residence control of relays
• Programmable relay control prefixes
• 100 entry code length
• Each entry code can be programmed to activate either or both relays
• 100 transmitter capacity
• Supports 4 blocks of transmitters with 4 facility codes
• Up to four access groups for shared control of transmitter blocks
• Supports MGT safety edge transmitter
• Internal clock and calendar with battery backup
• Event log memory retains the last 450 system events

• Keypad programmable
• Locally & remotely programmable with a telephone or computer
• Programming software built-in, connect with any internet browser
• Weather-proof, tamper-resistant housing
• Superheterodyne radio receiver
• Integral radio antenna
• Remote keypad support
• Bright white LED downlight
• Piezo sounder
• 2 heavy duty form "C" (N.O. & N.C.) relay outputs
• Timed anti-passback
• Keypad lockout
• Tactile key feel
• Two door sense/inhibit inputs
• Access keyswitch provision
• Removable terminal blocks
• Optional CCTV camera with infrared illuminators