|
General
Specifications [ Top ]
|
| Operating
Frequency: |
315
MHz |
| Data
Format: |
DX
format |
| Number
of Codes: |
1,048,575 |
| Channels: |
two
channels |
| Measured
Range: |
700
feet in one quadrant with DXT-21 transmitter; 500 feet in open air (four
quadrant test) |
| Operating
Temperature: |
32°
to 140° F (0° to 60° C) |
| Sensitivity: |
-95
dBm (typical) |
| Number
of Stored Transmitter Codes: |
32
per receiver |
| Receiver
Output: |
For
"C" relay contact, 1 amp, at 32 VDC per channel |
| Field
Selectable Receiver Output Modes: |
Momentary,
four seconds (factory set)
Momentary, one second
Flip-flop toggle
latch, 2-Channel |
|
MODE
BUTTON (one per channel)
|
| Learn
Mode: |
Press
and release to enter learn mode |
Transmitters
Learned: |
Press
and hold for five seconds after the last LED flash to delete all transmitters
on an associated channel |
| Erase
Memory: |
Press
and hold for five seconds after the last LED flash to delete all transmitters
on an associated channel |
| Clear
Latch: |
Press
and release |
Clear
Low
Battery: |
Press
and release mode switch on channel 2 (DXR-702 only) to clear low battery |
|
LED
INDICATOR
|
| Steady: |
Indicates
"learn" mode |
| Flashing: |
Indicates
number of transmitters learned on the selected channel |
| RF
Activity: |
Blinks
synchronously with detected RF activity |
| Antenna: |
F-connector
with antenna (supplied) |
| Input
Impedance: |
75
Ohm - 2:1 VSWR |
| Operating
Voltage: |
11
to 17.5 VDC
12 to 16 VAC |
| Current: |
25
mA at standby at 12 VDC
90 mA in alarm at 12 VDC |
| Connectors: |
Screw
terminal,+,-, with N/O, N/C, and common per receiver channel |
| Dimensions: |
5.5
in L x 1.25 in W x 4 in H (140 x 32 x 102 mm), excluding antenna |
| Accessories: |
Mounting
bracket, screws, and anchors (supplied) |
| Regulatory
Requirements: |
FCC
and DOC |
Close
