Max Gate Length (ft) 100 Max Gate Weight (lbs) 3000 Motor (hp) 1 Gate Travel (ft/sec) 1 Owner's Manual Outside CA 1 2 3 4+ 201.00 226.00 256.00 281.00 Inside CA 1 2 3 4+ 101.00 111.00 126.00 156.00 MultiCode Remote Control Kit 1 Commercial Grade Receiver 2 Remote Controls $55.49   LiftMaster ERT® Remote Control Kit 1 Commercial Grade Receiver 2 Remote Controls $84.50   See all EMX Gate Safety and Traffic Control Kit Voltage:  12V AC/DC 24V AC 24V DC 110V AC 220V AC Qty: $258.99   See all

Doorking Model 9200 1 HP Fail Safe Industrial Slide Gate Operator Availability Usually ships in 1-2 weeks. Doorking 9200 1 HP Fail Secure Industrial Slide Gate Operator 9200Regular Price: $3,885.00Our Price: $2,299.00 Select MOTOR FREIGHT as the shipping method when ordering this item. If Motor Freight is not selected, we will automatically change the shipping method to Motor Freight. Model (Select one): 9200-080 115 VAC Single Phase9200-081 230 VAC Single Phase(+$46.25)9200-084 208 Volt Three Phase(+$92.5)9200-082 230 Volt Three Phase(+$92.5)9200-083 460 Volt Three Phase(+$92.5) Mounting Stand: None0920-035 Heavy Duty Pedestal Mount(+$777) 21D Quantity: Doorking 9200: 1-HP Fail-Secure Industrial Slide Gate Operator APPLICATIONS Model 9200 operators are designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. Center mounting the operator requires an optional pedestal mounting base. ADVANCED FEATURES Direct driven limit nuts. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. Two convenience outlets. Fail-secure operation, includes crank for manual operation. Programming switches. Built-in reset switch. Built-in power On/Off switch. SPECIFICATIONS Model 9200 Maximum gate length 100-feet. Maximum gate weight 3000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) 40:1 gear reduction running in a continuous oil bath. 1 HP continuous-duty motor. 115 VAC 208 VAC 230 VAC 460 VAC Operator is shipped with chain brackets and 20-feet of #60 chain. Class III and IV applications only. Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions: 16"W x 34"H x 16"D OPTIONS AVAILABLE WITH THIS OPERATOR Heavy-duty pedestal mounting stand. (Recommended for gates over 30-feet to allow use of a chain support rail). Plug-in loop detectors. Heater kit for cold environments. High security industrial gate operator This operator is designed for very large and heavy gates in limited and restricted access applications only and is not designed for applications serving the general public such as gated communities, apartment houses, residential applications or public parking areas or garages. Adjustable partial open limit setting. Inherent reverse system monitors both motor current and output shaft speed (RPMs) for batter reliability and performance. Includes the advanced features as described under the 9100 models. This is a high security operator that is designed for fail-safe operation. When a power outage occurs, the gate will remain locked and cannot be manually forced open. Manual operation is by means of an inter-locked (motor cannot start while crank is inserted) manual hand crank that uses the operator drive system for easy operation of large heavy gates. Maximum gate weight is 3000lbs, maximum gate length is 100ft

Special Orders: All Special Order items require a 50% deposit of the total before ordering. Please call for lead times on Special Order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock transmitters/receivers, any stock or non-stock item we consider to be a special order item, and/or any item being ordered specifically for you are considered a special order. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 50% special order restocking fee. Warranty is void where evidence of misuse or abuse is present.