Max Gate Length (ft) 10 Max Gate Weight (lbs) 400 Motor (hp) 1/2 Gate Travel (ft/sec) 1 Owner's Manual Outside CA 1 2 3 4+ 201.00 226.00 256.00 281.00 Inside CA 1 2 3 4+ 101.00 111.00 126.00 156.00 MultiCode Remote Control Kit 1 Commercial Grade Receiver 2 Remote Controls $55.49   LiftMaster ERT® Remote Control Kit 1 Commercial Grade Receiver 2 Remote Controls $84.50   See all EMX Gate Safety and Traffic Control Kit Voltage:  12V AC/DC 24V AC 24V DC 110V AC 220V AC Qty: $258.99   See all

Doorking Model 6050 Swing Gate Operator For Residential Applications Only Availability Usually ships in 1-2 weeks. Doorking 6050 Swing Gate Operator For Residential Applications Only 6050-080Competitor's Price: $1,544.75Our Price: $1,199.99 Select MOTOR FREIGHT as the shipping method when ordering this item. If Motor Freight is not selected, we will automatically change the shipping method to Motor Freight. Mounting (select one): Post(+$200)Pad(+$270) Slave Operator: None6050-081(+$899) 21D Quantity: Doorking 6050 Swing Gate Operator For Residential Applications Only APPLICATIONS The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. ADVANCED FEATURES Self-adjusting, no maintenance limits. Overlap feature for dual swing gate operation. Designed with a built-in primary and secondary entrapment prevention system. Ports for plug-in loop detectors. Fail-safe release. Tamper detect circuit. DC Powered convenience open (Option on 6100 only). Gate tracker reporting output. Programming switches. Built-in reset switch. Built-in power On/Off switch. SPECIFICATIONS DoorKing Model 6050 Maximum gate width 10-feet. Maximum gate weight 400 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) Swings gate 90 degrees in approximately 10-seconds. 1/2 HP limited-duty motor. 115 VAC, 4.3 Amps. Class I applications. Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate opertator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions (operator only): 13.25"W x 12"H* x 23"D (* Height of operator only. Actual height above ground is determined by which mounting method is used) OPTIONS AVAILABLE WITH THIS OPERATOR Master / slave connection cable (6050 slave operator is shipped with 30-feet of cable; 6100 slave operator is shipped with 40-feet of cable). Post or pad mount - specify which. Plug-in loop detectors. Heater kit for cold environments. Single family residential gate operator Advanced microprocessor control board eliminates mechanical relays, limit switches and reversing contactors. Automatic limit settings means no limit switch adjustments - ever DoorKing's plug-in loop detectors simplify wiring and makes installation easy Mechanical and electronic inherent entrapment sensing system operable in both the open and close direction. The two-stage electronic and mechanical self-checking inherent reverse system makes these operators the safest on the market Automatic close timer is adjustable from 1 to 23 seconds. Two ports for plug-in loop detectors. Built-in reset switch. Gate overlap feature starts the master operator 1-2 seconds prior to the slave operator. Magnetic lock output provided for direct connection of mag locks to the circuit board. Tamper protect feature causes motor to run in the close direction if an attempt is made to force the gate open. Gate Tracker™ reporting output sends gate operator data to a companion DoorKing access control system. SPEED: 90º in approximately 10-12 seconds Miximum gate weight 400lbs, maximum length 10 ft 6000 series operators can be pad or post mounted allowing great flexibility to meet exact on-site requirements

Special Orders: All Special Order items require a 50% deposit of the total before ordering. Please call for lead times on Special Order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock transmitters/receivers, any stock or non-stock item we consider to be a special order item, and/or any item being ordered specifically for you are considered a special order. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 50% special order restocking fee. Warranty is void where evidence of misuse or abuse is present.