- Brand switch
- Transmitter DIP switch
- Transmit push buttons A and B, and
LED indicator
Preparation
Determine the BRAND
of the existing garage door opener or handheld remote controls.
If all remote controls are lost, the BRAND is
located on the ceiling mounted motor unit or on the receiver near
the flexible wire antenna. Proceed to the SECTION indicated on the
BRAND chart below.
Note: If programming
to more than one opener, after programming button "A"
refer to brand chart, and follow the instructions pertaining to
the brand you wish to program into button "B".
When the remotes range
is diminished, operation is intermittent, or the LED dims, replace
the battery. Memory is not lost when the battery is removed. Note:
Dispose of old batteries properly.
BRAND CHART:
Proceed to appropriate section.
SECTION
I Chamberlain, Sears, LiftMaster, Raynor,
Master Mechanic, Dolt
SECTION
II Stanley,
Multicode, Linear, Moore-O-Matic
SECTION
III Genie, Alliance, Blue Max
|
Close
