#450 Weatherguard Weatherstrip

#450 Weatherguard Weatherstrip 7 ft

• 7 feet for installing on side of any garage door frame and for top of single car garage
• 7 feet of neoprene rubber astragal to seal between the sides and top of the garage door. Use 16 foot weatherstrip for the top of 2 car garage door frames.
• Use finish nails (not included) to attach to door frame.
• Available in white, brown or almond
• 1-1/4 inch vinyl flap

1. Select method of application: Method 1 (wide lip outside) is generally used. Method 2 (wide lip inside) is used where garage floor level is lower than driveway - or in areas of severe icing conditions.
2. Measure width of bottom of garage door. Cut weatherstrip to size. Do not stretch weatherstrip while cutting or installing.
3. Nail weatherstrip to seal the sides and top of the garage frame. Stagger nails using finish nails.
4. Close door. See if door locks. If it doesn't, adjust door locking bar, or enlarge openings in door channels.
5. To obtain maximum life for this weatherstrip - DO NOT STRETCH WHEN INSTALLING