Linear MegaCode Gate or Garage Door Opener Remote MDT-1AB (Block Coded)  Linear MDT-1AB Gate or Garage Door Opener Remote (Block Coded)The single-channel MDT-1AB transmits the same code to the radio receiver when either front or top button is pressed. It is used where only remote control is needed, such as entrance to a gate when a free exit loop is used.
Block coding saves the time required for each transmitter to be individually learned. When used with a Linear access controller, all of these transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system. All transmitter code data is stored in no-volatile EEPROM. Data is retained in excess of 10 years, even if battery power runs out.
General Specifications
Linear MDT-1AB Literature
Features
- Compatible with all Linear access receivers and controllers.
- Superior transmission range.
- Factory programmed MegaCode format supports over 1,000,000 codes.
- Block coding with provisions for facility codes.
- Lithium battery powered.
- Same as product number ACP00721.
You will need to enter the facility code (00-15) and range you need. If you do not know the facility code or range of your remotes, please contact your installer. If a facility code and range are required. Orders may take 6 to 8 weeks before shipping. |
Special Orders: All Special Order items require a 50% deposit of the total before ordering. Please call for lead times on Special Order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock transmitters/receivers, any stock or non-stock item we consider to be a special order item, and/or any item being ordered specifically for you are considered a special order. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 50% special order restocking fee. Warranty is void where evidence of misuse or abuse is present. There are no refunds or exchanges for this item.
|
General
Specifications
|
| Dimensions: |
1.6
in L x 0.8 in W x 4.2 in H (41 x 20 x 107 mm) |
| Power: |
Two
3V 2032 type lithium batteries (supplied) |
| Battery
Life: |
Up
to five years |
| Frequency: |
318
MHz |
| Number
of Codes: |
1,000,000
plus |
| Block
Coding: |
Units
are sequentially coded at the factory to customers specifications.
Facility code may be specified. |
| Channels: |
One
channel |
|
 |
Manufacturers |
 |
 |
By Category |
 |

|